Произошла ошибка во время регистрации, пожалуйста, повторите попытку позже.
Произошла ошибка во время регистрации, пожалуйста, повторите попытку позже.
Спросите нас
Бизнес-направления
Войти
EMT30 is developed to break up stratified heat, humidity and stagnant air. A plastic duct system can be mounted onto the EMT30 to move and mix air over long distances, thereby limiting temperature fluctuations during heating processes. The unique propeller design is self-cleaning and, together with air flow rectifiers, allows the highest efficiency to be reached. The housing and air conveyor (venturi) are made of a strong galvanised sheet-steel. The 6-blade propeller is statically and dynamic balanced for low noise and low vibration. To improve aerodynamic efficiency, the fan has been developed in Munters R&D lab. The test chamber has been built according to ANSI/AMCA 210-85 Figure 15 specifications. Construction details and airtightness have been verified by personnel of the BESS Lab at the Agricultural Engineering Department, University of Illinois – USA.
информация о продукте
Техническая спецификация
Сравнение
Загрузки
0.75 HP | |
---|---|
760 mm | |
0.75 hp | |
14,680 m3/h | |
17.8 m3/wh | |
1.0 HP | |
760 mm | |
0.5 hp | |
13,570 m3/h | |
20.2 m3/wh |
0.75 HP | |
---|---|
760 mm | |
0.75 hp | |
14,680 m3/h | |
17.8 m3/wh | |
1.0 HP | |
760 mm | |
0.5 hp | |
13,570 m3/h | |
20.2 m3/wh |
Недействительная идентификация пользователя
Произошла ошибка! Повторите попытку позже.
Забыли пароль?
Недействительная идентификация пользователя
Произошла ошибка! Повторите попытку позже.
Check your email within a couple of minutes to reset your password, if you can’t see any incoming messages try to check into your spam folder!