메시지 전송 시, 오류가 발생하였습니다. 재시도하십시오
메시지 전송 시, 오류가 발생하였습니다. 재시도하십시오
문의 하십시오
사업 영역
로그인
EMT30 is developed to break up stratified heat, humidity and stagnant air. A plastic duct system can be mounted onto the EMT30 to move and mix air over long distances, thereby limiting temperature fluctuations during heating processes. The unique propeller design is self-cleaning and, together with air flow rectifiers, allows the highest efficiency to be reached. The housing and air conveyor (venturi) are made of a strong galvanised sheet-steel. The 6-blade propeller is statically and dynamic balanced for low noise and low vibration. To improve aerodynamic efficiency, the fan has been developed in Munters R&D lab. The test chamber has been built according to ANSI/AMCA 210-85 Figure 15 specifications. Construction details and airtightness have been verified by personnel of the BESS Lab at the Agricultural Engineering Department, University of Illinois – USA.
제품 정보
기술 사양
비교
다운로드
1.5 HP | |
---|---|
Propeller diameter | 760 mm |
Motor | 0.75 hp |
Airflow 0Pa | 14,680 m3/h |
Specific performance at 0Pa | 17.8 m3/wh |
1.0 HP | |
Propeller diameter | 760 mm |
Motor | 0.5 hp |
Airflow 0Pa | 13,570 m3/h |
Specific performance at 0Pa | 20.2 m3/wh |
1.5 HP | |
---|---|
Propeller diameter | 760 mm |
Motor | 0.75 hp |
Airflow 0Pa | 14,680 m3/h |
Specific performance at 0Pa | 17.8 m3/wh |
1.0 HP | |
Propeller diameter | 760 mm |
Motor | 0.5 hp |
Airflow 0Pa | 13,570 m3/h |
Specific performance at 0Pa | 20.2 m3/wh |
아이디 또는 비밀번호를 다시 확인하세요
오류. 나중에 다시 시도하십시오
비밀번호를 잊으셨나요?
아이디 또는 비밀번호를 다시 확인하세요
오류. 나중에 다시 시도하십시오
Check your email within a couple of minutes to reset your password, if you can’t see any incoming messages try to check into your spam folder!